Mô tả ngắn gọn
| I/O module | 16 digital outputs 24 VDC for 1-wire connections |
Thông tin chung
| B&R ID code | 0xDD4C |
| Chỉ số trạng thái | I/O function per channel, trạng thái hoạt động, module status |
| Chẩn đoán | |
| Chạy mô-đun/lỗi | Yes, using LED status indicator and software |
| Đầu ra | Yes, using LED status indicator and software (output error status) |
| Tiêu thụ điện năng | |
| Bus | 0.28 W |
| Internal I/O | 0.95 W |
| Tiêu tán công suất bổ sung do bộ truyền động gây ra (resistive) [W] | +0.56 |
| Chứng nhận | |
| CE | Yes |
| UKCA | Yes |
| ATEX |
Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user’s manual) FTZÚ 09 ATEX 0083X |
| UL |
cULus E115267 Thiết bị điều khiển công nghiệp |
| HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV |
Nhiệt độ: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Nhiệt độ: 5 – 55°C Vibration: 4 g EMC: Bridge and open deck |
Digital outputs
| Khác nhau | Dòng điện-sourcing FET |
| Điện áp danh định | 24 VDC |
| Điện áp chuyển mạch | 24 VDC -15% / +20% |
| Dòng điện đầu ra danh nghĩa | 0.5 A |
| Tổng dòng điện danh định | 8 A |
| Connection type | 1-wire connections |
| Mạch đầu ra | Source |
| Bảo vệ đầu ra |
Thermal shutdown in the event of overcurrent or short circuit (see value “Short-circuit peak current”) Internal freewheeling diode for switching inductive loads (see section “Switching inductive loads”) |
| Diagnostic status | Output monitoring with 10 ms delay |
| Leakage current when the output is switched off | 5 µA |
| RDS(on) | 140 mΩ |
| Dòng điện ngắn mạch cực đại | <3 A |
| Bật trong trường hợp quá tải hoặc ngắn mạch | Approx. 10 ms (depends on the module temperature) |
| Độ trễ chuyển đổi | |
| 0 → 1 | <300 µs |
| 1 → 0 | <300 µs |
| Tần số chuyển đổi | |
| Resistive load | Max. 500 Hz |
| Inductive load | See section “Switching inductive loads”. |
| Braking voltage when switching off inductive loads | Typ. 45 VDC |
| Insulation voltage between channel and bus | 500 Veff |
Tính chất điện
| Cách ly điện |
Channel isolated from bus Channel not isolated from channel and I/O power supply |
Điều kiện hoạt động
| Hướng lắp đặt | |
| Nằm ngang | Yes |
| Thẳng đứng | Yes |
| Độ cao lắp đặt so với mực nước biển | |
| 0 to 2000 m | Không có giới hạn |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Mức độ bảo vệ mỗi EN 60529 | IP20 |
Điều kiện môi trường xung quanh
| Nhiệt độ | |
| Hoạt động | |
| Nằm ngang mounting orientation | -25 to 60°C |
| Thẳng đứng mounting orientation | -25 to 50°C |
| Giảm tải | See section “Giảm tải”. |
| Lưu trữ | -40 to 85°C |
| Transport | -40 to 85°C |
| Độ ẩm tương đối | |
| Hoạt động | Up to 100%, condensing |
| Lưu trữ | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Tính chất cơ học
| Note |
Order 1x cầu đấu X20TB1F separately. Order 1x bus module X20cBM11 separately. |
| Pitch | 12.5+0.2 mm |



