Mô tả ngắn gọn
| I/O module | 4 digital outputs 24 VDC for 3-wire connections |
Thông tin chung
| B&R ID code | 0xF5F9 |
| Chỉ số trạng thái | I/O function per channel, trạng thái hoạt động, module status |
| Chẩn đoán | |
| Chạy mô-đun/lỗi | Yes, using LED status indicator and software |
| Đầu ra | Yes, using LED status indicator and software (output error status) |
| Tiêu thụ điện năng | |
| Bus | 0.1 W (Rev. <D0: 0.16 W) |
| Internal I/O | 0.49 W |
| Tiêu tán công suất bổ sung do bộ truyền động gây ra (resistive) [W] | +1 (Rev. <D0: +1.6) |
| Chứng nhận | |
| CE | Yes |
| UKCA | Yes |
| DNV |
Nhiệt độ: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| CCS | Yes |
| LR | ENV1 |
| ABS | Yes |
| BV | EC33B Nhiệt độ: 5 – 55°C Vibration: 4 g EMC: Bridge and open deck |
Digital outputs
| Khác nhau | Dòng điện-sourcing FET |
| Điện áp danh định | 24 VDC |
| Điện áp chuyển mạch | 24 VDC -15% / +20% |
| Dòng điện đầu ra danh nghĩa | 2 A |
| Tổng dòng điện danh định | 8 A |
| Connection type | 3-wire connections |
| Mạch đầu ra | Source |
| Bảo vệ đầu ra |
Thermal shutdown in the event of overcurrent or short circuit (see value “Short-circuit peak current”) Internal freewheeling diode for switching inductive loads |
| Actuator power supply | 0.5 A in total for output-independent actuator power supply |
| Diagnostic status | Output monitoring with 10 ms delay |
| Leakage current when the output is switched off | 5 µA |
| RDS(on) | 60 mΩ (Rev. <D0: 100 mΩ) |
| Dòng điện ngắn mạch cực đại | <4 A |
| Bật trong trường hợp quá tải hoặc ngắn mạch | Approx. 10 ms (depends on the module temperature) |
| Độ trễ chuyển đổi | |
| 0 → 1 | <300 µs |
| 1 → 0 | <300 µs |
| Tần số chuyển đổi | |
| Resistive load | Max. 500 Hz |
| Braking voltage when switching off inductive loads | 0.6 V |
| Insulation voltage between channel and bus | 500 Veff |
| Additional functions | Đầu ra can be connected in parallel to increase the output current. |
PWM output
| Số lượng | 4 |
| Điện áp danh định | 24 VDC |
| Dòng điện danh định | 2 A |
| PWM frequency | 15.25 to 1000 Hz |
| Bảo vệ đầu ra |
Thermal shutdown in the event of overcurrent or short circuit (see value “Short-circuit peak current”) Internal freewheeling diode for switching inductive loads |
| Khác nhau | Dòng điện-sourcing FET |
| Configurable dither | 0 to 250 Hz, 1 to 25% of the period duration |
| Period duration resolution | 1000 to 65535 µs in 1 µs steps |
| Insulation voltage between channel and bus | 500 Veff |
Actuator power supply
| Điện áp | Module power supply minus voltage drop for short-circuit protection |
| Giảm điện áp để bảo vệ ngắn mạch tại 500 mA | Max. 2 V |
| Chống đoản mạch | Yes |
| Tiêu thụ điện năng | |
| Actuator power supply | Max. 12 W |
Tính chất điện
| Cách ly điện |
Channel isolated from bus Channel not isolated from channel and I/O power supply |
Điều kiện hoạt động
| Hướng lắp đặt | |
| Nằm ngang | Yes |
| Thẳng đứng | Yes |
| Độ cao lắp đặt so với mực nước biển | |
| 0 to 2000 m | Không có giới hạn |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Mức độ bảo vệ mỗi EN 60529 | IP20 |
Điều kiện môi trường xung quanh
| Nhiệt độ | |
| Hoạt động | |
| Nằm ngang mounting orientation | -25 to 60°C |
| Thẳng đứng mounting orientation | -25 to 50°C |
| Giảm tải | See section “Giảm tải”. |
| Lưu trữ | -40 to 85°C |
| Transport | -40 to 85°C |
| Độ ẩm tương đối | |
| Hoạt động | 5 to 95%, non-condensing |
| Lưu trữ | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
Tính chất cơ học
| Note |
Order 1x cầu đấu X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |



