Mô tả ngắn gọn
| I/O module | 8 digital outputs 24 VDC |
Thông tin chung
| B&R ID code | 0x1467 |
| Chỉ số trạng thái | I/O function per channel, supply voltage, bus function |
| Chẩn đoán | |
| Đầu ra | Yes, using LED status indicator and software |
| I/O power supply | Yes, using LED status indicator |
| Connection type | |
| X2X Link | M12, B-coded |
| Đầu ra | 8x M8, 3-pin |
| I/O power supply | M8, 4-pin |
| Tiêu thụ điện năng | |
| Internal I/O | 2 W |
| X2X Link power supply | 0.75 W |
| Chứng nhận | |
| CE | Yes |
| UKCA | Yes |
| ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
| UL |
cULus E115267 Thiết bị điều khiển công nghiệp |
| HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
I/O power supply
| Điện áp danh định | 24 VDC |
| Điện áp range | 18 to 30 VDC |
| Integrated protection | Reverse polarity protection |
| Tiêu thụ điện năng | |
| Actuator power supply | Max. 12 W |
Digital outputs
| Số lượng | 8 |
| Khác nhau | Dòng điện-sourcing FET |
| Điện áp danh định | 24 VDC |
| Điện áp chuyển mạch | I/O power supply minus residual voltage |
| Dòng điện đầu ra danh nghĩa | 2 A |
| Tổng dòng điện danh định | 8 A |
| Mạch đầu ra | Source |
| Bảo vệ đầu ra | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
| Actuator power supply | 0.5 A summation current |
| Diagnostic status | Output monitoring with 10 ms delay |
| Leakage current when the output is switched off | 5 µA |
| Switching on after overload shutdown | Approx. 10 ms (depends on the module temperature) |
| Group 1 | Channels 1 to 4 |
| Group 2 | Channels 5 to 8 |
| Điện áp dư | <0.5 V at 2 A nominal current |
| Dòng điện ngắn mạch cực đại | <21 A |
| Độ trễ chuyển đổi | |
| 0 → 1 | <250 µs |
| 1 → 0 | <270 µs |
| Tần số chuyển đổi | |
| Resistive load | Max. 100 Hz |
| Braking voltage when switching off inductive loads | 50 VDC |
| Continuous current per | |
| Output | Max. 2 A |
| Group | Max. 4 A (simultaneity factor = 50%) |
| Module | Max. 8 A |
Actuator power supply
| Điện áp | I/O power supply minus voltage drop for short-circuit protection |
| Giảm điện áp để bảo vệ ngắn mạch tại 500 mA | Max. 2 VDC |
| Summation current | Max. 0.5 A |
| Chống đoản mạch | Yes |
Tính chất điện
| Cách ly điện |
Channel isolated from bus
Channel not isolated from channel
|
Điều kiện hoạt động
| Hướng lắp đặt | |
| Any | Yes |
| Độ cao lắp đặt so với mực nước biển | |
| 0 to 2000 m | Không có giới hạn |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Mức độ bảo vệ mỗi EN 60529 | IP67 |
Điều kiện môi trường xung quanh
| Nhiệt độ | |
| Hoạt động | -25 to 60°C |
| Giảm tải | See section “Giảm tải”. |
| Lưu trữ | -40 to 85°C |
| Transport | -40 to 85°C |
Tính chất cơ học
| Dimensions | |
| Width | 53 mm |
| Height | 85 mm |
| Depth | 42 mm |
| Weight | 180 g |
| Torque for connections | |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |



