Mô tả ngắn gọn
I/O module | 8 digital outputs 24 VDC |
Thông tin chung
B&R ID code | 0x2658 |
Chỉ số trạng thái | I/O function per channel, actuator power supply per channel, supply voltage, bus function |
Chẩn đoán | |
Đầu ra | Yes, using LED status indicator and software |
Actuator power supply | Yes, using LED status indicator and software |
I/O power supply | Yes, using LED status indicator and software |
Connection type | |
X2X Link | M12, B-coded |
Đầu ra | 8x M12, A-coded |
I/O power supply | M8, 4-pin |
Tiêu thụ điện năng | |
Internal I/O | 1.7 W |
X2X Link power supply | 0.75 W |
Chứng nhận | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
UL |
cULus E115267 Thiết bị điều khiển công nghiệp |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
KC | Yes |
I/O power supply
Điện áp danh định | 24 VDC |
Điện áp range | 18 to 30 VDC |
Integrated protection | Reverse polarity protection |
Tiêu thụ điện năng | |
Actuator power supply | Max. 12 W |
Digital outputs
Số lượng | 8 |
Khác nhau | Dòng điện-sourcing FET |
Điện áp danh định | 24 VDC |
Điện áp chuyển mạch | I/O power supply minus residual voltage |
Dòng điện đầu ra danh nghĩa | 2 A |
Tổng dòng điện danh định | 8 A |
Mạch đầu ra | Source |
Bảo vệ đầu ra | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
Actuator power supply | |
Actuator current | 0.1 A |
Tổng dòng điện danh định | 0.5 A |
Diagnostic status | Output monitoring with 10 ms delay |
Leakage current when the output is switched off | 5 µA |
Switching on after overload shutdown | Approx. 10 ms (depends on the module temperature) |
Điện áp dư | <0.5 V at 2 A nominal current |
Dòng điện ngắn mạch cực đại | <21 A |
Độ trễ chuyển đổi | |
0 → 1 | <250 µs |
1 → 0 | <270 µs |
Tần số chuyển đổi | |
Resistive load | Max. 100 Hz |
Braking voltage when switching off inductive loads | 50 VDC |
Actuator power supply
Điện áp | I/O power supply minus voltage drop for short-circuit protection |
Giảm điện áp để bảo vệ ngắn mạch tại 500 mA | Max. 2 VDC |
Summation current | Max. 0.5 A |
Chống đoản mạch | Yes |
Tính chất điện
Cách ly điện |
Channel isolated from bus
Channel not isolated from channel
|
Điều kiện hoạt động
Hướng lắp đặt | |
Any | Yes |
Độ cao lắp đặt so với mực nước biển | |
0 to 2000 m | Không có giới hạn |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Mức độ bảo vệ mỗi EN 60529 | IP67 |
Điều kiện môi trường xung quanh
Nhiệt độ | |
Hoạt động | -25 to 60°C |
Giảm tải | See section “Giảm tải”. |
Lưu trữ | -40 to 85°C |
Transport | -40 to 85°C |
Tính chất cơ học
Dimensions | |
Width | 53 mm |
Height | 155 mm |
Depth | 42 mm |
Weight | 330 g |
Torque for connections | |
M8 | Max. 0.4 Nm |
M12 | Max. 0.6 Nm |