Mô tả ngắn gọn
I/O module | 4 analog outputs ±10 V |
Thông tin chung
B&R ID code | 0x16F3 |
Chỉ số trạng thái | I/O function per channel, supply voltage, bus function |
Chẩn đoán | |
I/O power supply | Yes, using LED status indicator and software |
Connection type | |
X2X Link | M12, B-coded |
Đầu ra | 4x M12, A-coded |
I/O power supply | M8, 4-pin |
Tiêu thụ điện năng | |
Internal I/O | 4 W |
X2X Link power supply | 0.75 W |
Chứng nhận | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
UL |
cULus E115267 Thiết bị điều khiển công nghiệp |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
KC | Yes |
I/O power supply
Điện áp danh định | 24 VDC |
Điện áp range | 18 to 30 VDC |
Integrated protection | Reverse polarity protection |
Tiêu thụ điện năng | |
Actuator power supply | Max. 12 W |
Analog outputs
Output | ±10 V |
Độ phân giải chuyển đổi kỹ thuật số | 12-bit |
Thời gian chuyển đổi | 400 µs for all outputs |
Settling time on output change over entire range | Approx. 1 ms |
Switch on/off behavior | Internal enable relay for startup and errors |
Bảo vệ đầu ra | Protection against wiring with supply voltage, short-circuit proof |
Định dạng đầu ra | Example: INT 0x8001 – 0x7FFF / 1 LSB = 0x0010 = 4.882 mV |
Tải per channel | Max. ±10 mA, load ≥ 1 kΩ |
Output filter | First-order low-pass filter / cutoff frequency 2.5 kHz |
Max. gain drift | 0.012%/°C |
Max. offset drift | 0.015%/°C |
Error caused by load change | Max. 0.01%, from 10 MΩ → 1 kΩ, resistive |
Nonlinearity | <0.15% |
Insulation voltage between channel and bus | 500 Veff |
Output response when the power supply is switched on/off | An enable relay is switched on at a defined value ≠ 0, default setting = 10 kΩ to GND |
Chống đoản mạch | |
Dòng điện limiting | ±40 mA |
To actuator or I/O power supply | Yes |
To GND | Yes |
Max. error at 25°C and 10 kΩ load | |
Gain | 0.15% |
Offset | 0.05% |
Actuator power supply
Điện áp | I/O power supply minus voltage drop for short-circuit protection |
Giảm điện áp để bảo vệ ngắn mạch tại 500 mA | Max. 2 VDC |
Summation current | Max. 0.5 A |
Chống đoản mạch | Yes |
Tính chất điện
Cách ly điện |
Channel isolated from bus
Channel not isolated from channel
|
Điều kiện hoạt động
Hướng lắp đặt | |
Any | Yes |
Độ cao lắp đặt so với mực nước biển | |
0 to 2000 m | Không có giới hạn |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Mức độ bảo vệ mỗi EN 60529 | IP67 |
Điều kiện môi trường xung quanh
Nhiệt độ | |
Hoạt động | -25 to 60°C |
Giảm tải | – |
Lưu trữ | -40 to 85°C |
Transport | -40 to 85°C |
Tính chất cơ học
Dimensions | |
Width | 53 mm |
Height | 85 mm |
Depth | 42 mm |
Weight | 190 g |
Torque for connections | |
M8 | Max. 0.4 Nm |
M12 | Max. 0.6 Nm |