Mô đun X20AP3111

I/O module	3-phase power and energy metering module for current transformers

B&R ID code	0xC9DA
Chỉ số trạng thái	I/O function per channel, trạng thái hoạt động, module status
Chẩn đoán
Chạy mô-đun/lỗi	Yes, using LED status indicator and software
Đầu vào	Yes, using LED status indicator and software
Tiêu thụ điện năng
Bus	0.85 W (Rev. <D0) 0.50 W (Rev. =D0) 0.45 W (Rev. >D0)
Internal I/O	–
Additional module power dissipation [W]	40 mW
Insulation voltages
Đầu vào – Bus / I/O power supply	Tested at 5500 VDC, 1 min
Đầu vào – Ground	Tested at 5500 VDC, 1 min
Bus / I/O power supply – Ground	Tested at 510 VAC, 1 min
Chứng nhận
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user’s manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Thiết bị điều khiển công nghiệp
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Nhiệt độ: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Nhiệt độ: 5 – 55°C Vibration: 4 g EMC: Bridge and open deck

Number of phases	3
Input impedance	1.68 MΩ
Điện áp danh định U_N
Between phases	Max. 480 VAC
Phase to N	Max. 277 VAC
Max. display value	655 VAC
Resolution	10 mV, with voltage connected directly
Rated frequency	50 and 60 Hz
Measurable frequency
Measurement range	45 to 65 Hz
Resolution	0.01 Hz

Số lượng	4 AC inputs
Dòng điện danh định I_N
Secondary	20 mA
Primary	65 A directly configurable, larger values through conversion in the application
Max. overload current	20 x I_N for 0.5 s
Max. measurement current	20 mA
Resolution	1 mA, based on the primary current
Load	25 Ω

U_RMS and I_RMS	<0.5%
U_RMS	±0.65%
I_RMS	±0.65%
Effective, reactive and apparent power	±0.80%
Frequency, power factor and phase angle	±0.50%
Calibration accuracy	<0.15%
Active energy per phase and total	±0.40%
Active energy per phase and total
Power factor = 1.0	0.1%
Power factor = 0.5 L	0.1%
Power factor = 0.8 C	0.1%
Active energy of fundamental frequency per phase and total	±0.50%
Active energy of fundamental frequency per phase and total
Power factor = 1.0	0.2%
Power factor = 0.5 L	0.2%
Power factor = 0.8 C	0.2%
Active energy of harmonics per phase and total	±0.80%
Active energy of harmonics per phase and total
sin ϕ = 1.0	0.5%
sin ϕ = 0.5 L	0.5%
sin ϕ = 0.8 C	0.5%
Reactive energy per phase and total	±0.50%
Reactive energy per phase and total
sin ϕ = 1.0	0.2%
sin ϕ = 0.5 L	0.2%
sin ϕ = 0.8 C	0.2%
Apparent energy
Per phase and arithmetic total	±0.50%
Vector sum	±0.80%

Cách ly điện	Channel isolated from bus Channel not isolated from channel

Hướng lắp đặt
Nằm ngang	Yes
Thẳng đứng	Yes
Độ cao lắp đặt so với mực nước biển
0 to 2000 m	Không có giới hạn
>2000 m	Not permitted
Mức độ bảo vệ mỗi EN 60529	IP20

Nhiệt độ
Hoạt động
Nằm ngang mounting orientation	-25 to 60°C
Thẳng đứng mounting orientation	-25 to 50°C
Giảm tải	–
Lưu trữ	-40 to 85°C
Transport	-40 to 85°C
Độ ẩm tương đối
Hoạt động	5 to 95%, non-condensing
Lưu trữ	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing