Mô đun X90RO440.04-S1

I/O module	4 relays with 1 normally open contact each, 9 to 32 VDC / 2 and 4 A

B&R ID code	0xFB3D
System requirements
Automation Studio	4.7 or later
Automation Runtime	4.7 or later
mapp Technology Package	mapp Safety 5.12 and later:
Chỉ số trạng thái	–
Chẩn đoán
Chạy mô-đun/lỗi	Yes, using software
Đầu ra	Yes, using software
Tiêu thụ điện năng	Max. 2 W
Max. I/O cycle time	1 ms
Tiêu thụ điện năng
Bus	0.26 W
Internal I/O	1.65 W
Tiêu tán công suất bổ sung do bộ truyền động gây ra (resistive) [W]	+3.2
Chứng nhận
UN ECE-R10	Yes
CE	Yes
UKCA	Yes

EN ISO 13849-1:2015
MTTFD per channel	100 years if the relay channel is used individually, 390 years if 2 relay channels are connected in series
Mission time	Max. 20 years
IEC 61508:2010, EN 62061:2013
PFH / PFH_d
Module	<2.710^-7 if the relay channel is used individually, <5.410^-9if 2 relay channels are connected in series
openSAFETY wired	Negligible
openSAFETY wireless	<110^-14 Number of openSAFETY packets per hour
PFD per channel	<5.610^-4 if the relay channel is used individually, <110^-4if 2 relay channels are connected in series
Proof test interval (PT)	20 years
Safe relay channels
EN ISO 13849-1:2015
Category	KAT 1 if the relay channel is used individually, KAT 4 if 2 relay channels are connected in series
PL	PL c if the relay channel is used individually, PL e if 2 relay channels are connected in series
B10d
DC1, 24 VDC	2 A / 1,800,000 4 A / 1,000,000
DC13, 24 VDC	2 A / 121,400 4 A / 120,000
IEC 61508:2010, EN 62061:2013
SIL CL	SIL 1 if the relay channel is used individually, SIL 3 if 2 relay channels are connected in series

Điện áp range	9 to 32 VDC

Số lượng	4
Khác nhau	Relay / Normally open contact, internal high-side and low-side control
Dòng điện đầu ra danh nghĩa	Relays 1 and 2: 2 A Relays 3 and 4: 4 A
Diagnostic status	Contact position determined by positively driven contacts
Max. switching frequency	10 Hz
Độ trễ chuyển đổi
0 → 1	<50 ms
1 → 0	<20 ms
Service life
Mechanical	Min. 1 x 10⁷ ops.
Electrical	Min. 1 x 10⁵ ops. (at 4 A / 32 VDC)
Protective circuit
Internal	–
External	Relays 1 and 2: External fuse 2 A Relays 3 and 4: External fuse 4 A
Điện trở tiếp xúc (without cầu đấu)	80 mΩ
Contact service life	See “Contact service life”.
Điện áp chuyển mạch range	5 to 32 VDC
Switching current range	1 mA to 4 A
Max. inrush current	20 A for 25 ms, max. 1x per minute
Overvoltage category per EN 60664-1	II
Max. switching capacity
DC1	Relays 1 and 2: 24 VDC / 2 A Relays 3 and 4: 24 VDC / 4 A
DC13	Relays 1 and 2: 24 VDC / 2 A Relays 3 and 4: 24 VDC / 4 A

Cách ly điện	Channel isolated from channel and bus

Nhiệt độ
Hoạt động
Nằm ngang mounting orientation	-40 to 75°C housing surface
Thẳng đứng mounting orientation	-40 to 75°C housing surface
Lưu trữ	-40 to 85°C
Transport	-40 to 85°C
Độ ẩm tương đối
Hoạt động	5 to 100%, condensing
Lưu trữ	5 to 100%, condensing
Transport	5 to 100%, condensing

Brand