Mô tả ngắn gọn
I/O module | 2 full-bridge strain gauge inputs |
Thông tin chung
B&R ID code | 0x8820 |
Chỉ số trạng thái | Channel status, trạng thái hoạt động, module status |
Chẩn đoán | |
Chạy mô-đun/lỗi | Yes, using LED status indicator and software |
Open circuit | Yes, using LED status indicator and software |
Input | Yes, using LED status indicator and software |
Connection type | |
X2X Link | M12, B-coded |
Đầu vào | 4x M12, A-coded |
I/O power supply | M8, 4-pin |
Tiêu thụ điện năng | |
Bus | 0.75 W |
Internal I/O | 2.4 W |
Chứng nhận | |
CE | Yes |
UKCA | Yes |
ATEX |
Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 – Max. 60°C TÜV 05 ATEX 7201X |
UL |
cULus E115267 Thiết bị điều khiển công nghiệp |
HazLoc |
cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
KC | Yes |
I/O power supply
Điện áp danh định | 24 VDC |
Điện áp range | 18 to 30 VDC |
Integrated protection | Reverse polarity protection |
Full-bridge strain gauge
Strain gauge factor | 2 to 256 mV/V, configurable using software |
Connection | 4- or 6-wire connections |
Kiểu đầu vào | Differential, used to evaluate a full-bridge strain gauge |
Độ phân giải chuyển đổi kỹ thuật số | 24-bit |
Thời gian chuyển đổi | Depends on the configured data output rate |
Data output rate | 2.5 to 7,500 samples per second, configurable using software (fDATA) |
Bộ lọc đầu vào | |
Cutoff frequency | 5 kHz |
Order | 3 |
Slope | 60 dB |
ADC filter characteristics | Sigma-delta, see section “Filter characteristics of the sigma-delta A/D converter” |
Operating range / Measurement sensor | 85 to 5,000 Ω |
Influence of cable length | See section “Calculation example”, sensor cable length: Max. 30 m |
Bảo vệ đầu vào | RC protection |
Common-mode range |
0 to 3 VDC Permissible input voltage range (with regard to the electric potential strain gauge GND) on inputs “Input +” and “Input -” |
Insulation voltage between input and bus | 500 Veff |
Quy trình chuyển đổi | Sigma-delta |
Output of digital value | |
Broken bridge supply line | Value approaching 0 |
Broken sensor line | Value approaching ±end value (status bit “Line monitoring” is set in register “Module status”) |
Valid range of values | 0xFF800001 to 0x007FFFFF (-8,388,607 to 8,388,607) |
Strain gauge supply | |
Điện áp | 5.5 VDC / Max. 65 mA |
Short-circuit and overload-proof | Yes |
Điện áp drop for short-circuit protection | Max. 0.2 VDC at 65 mA and 25°C |
Quantization | |
LSB value (16-bit) | |
2 mV/V | 336 nV |
4 mV/V | 671 nV |
8 mV/V | 1.343 µV |
16 mV/V | 2.686 µV |
32 mV/V | 5.371 µV |
64 mV/V | 10.74 µV |
128 mV/V | 21.48 µV |
256 mV/V | 42.97 µV |
LSB value (24-bit) | |
2 mV/V | 1.31 nV |
4 mV/V | 2.62 nV |
8 mV/V | 5.25 nV |
16 mV/V | 10.49 nV |
32 mV/V | 20.98 nV |
64 mV/V | 41.96 nV |
128 mV/V | 83.92 nV |
256 mV/V | 167.85 nV |
Nhiệt độ coefficient | 30 ppm/°C |
Max. gain drift | 12 ppm/°C |
Max. offset drift | 2 ppm/°C |
Nonlinearity | <10 ppm |
Tính chất điện
Cách ly điện |
Bus isolated from analog input and strain gauge supply voltage
Channel not isolated from I/O power supply
|
Điều kiện hoạt động
Hướng lắp đặt | |
Nằm ngang | Yes |
Thẳng đứng | Yes |
Độ cao lắp đặt so với mực nước biển | |
0 to 2000 m | Không có giới hạn |
>2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
Mức độ bảo vệ mỗi EN 60529 | IP67 |
Điều kiện môi trường xung quanh
Nhiệt độ | |
Hoạt động | -25 to 60°C |
Giảm tải | – |
Lưu trữ | -40 to 85°C |
Transport | -40 to 85°C |
Tính chất cơ học
Dimensions | |
Width | 53 mm |
Height | 85 mm |
Depth | 42 mm |
Weight | 190 g |
Torque for connections | |
M8 | Max. 0.4 Nm |
M12 | Max. 0.6 Nm |